Ventsi

I have found a perfect solution for an AUX IN on the BMW reverse Radio. At frist the Tape has to be taken out. Then the two pins of the TEA0676T 1+16 should be removed. I just lift them up from the motherboard. This is important otherwise the music will be very bad because the noise from this IC will be in the way. After that on the back side of the motherboard are also two points we’re the pins 1+16 are connected to. On this points you need 1x 10umF capacitor on yeach pin. That’s because the audio IC is putting out 4.2V DC offset voltage and the AUX cannot be connected to the MP3player.

I install one bucket seat in my E46 because the stock ones are to heavy (25kg vs 8kg ) and uncomfortable. I don’t now way the seat is called junior but I fit in perfekt with 1,88m and 110kg. The passenger seat isn’t install because not everybody can fit in and I will use it only if I go racing with a passenger other weise I will take it out for that day. The bucket seat is also very good for a daily an I have no issues getting in or out of the car.

Hello guy’s, My name is Ventsi and I have been for quite some time on this forum, but I have never posted something because i just did the normal maintenance on my car. My plan is to go for a drive on the Hockenheimring and many other track day’s after that. Therefore, I wanted everything to work perfect and in the last weeks I installed the first important thing for me. But there was very little information about pressure and temperature gauges for the E46 and I thought that this could be helpful for someone. The installation is very easy and straight forward.