The Hybrid Czinger 21C Uses An 11,000rpm 2.9-Litre Twin-Turbo V8

Czinger has revealed the (almost) full spec of the limited-edition 21C hypercar, including a 1:1 power to weight ratio and an astonishing combustion engine
The Hybrid Czinger 21C Uses An 11,000rpm 2.9-Litre Twin-Turbo V8

Czinger has revealed the full details of its incredible 21C hypercar. We now know that it’s a hybrid, linking two high-output electric motors at the front to a mid-mounted 2.9-litre V8 that revs to 11,000rpm.

With a dry weight lower than 1200kg and total power output of 1233bhp (1250 metric ponies), the 21C should have a true 1:1 power to weight ratio with fluids on board – at least before you put a fat, wealthy driver in it. This is all new to us since the teasers earlier this week and last week.

The Hybrid Czinger 21C Uses An 11,000rpm 2.9-Litre Twin-Turbo V8

If you’ve finished retrieving your eyebrows from the ceiling, we’ll continue. That V8, measuring 2.88 litres, was developed in-house with a flat-plane crank and two turbochargers. Combined with a motor at each front wheel it produces acceleration best described as… dramatic.

The 0-62mph standard is dropped in just 1.9 seconds if you’re physically capable. A standing quarter-mile is over in 8.1 seconds. It gets from zero to 186mph in 15 seconds and to 248mph in 29 seconds. That’s less than half a minute to go from stationary to speeds that would test even the most confident patron’s sphinctral integrity.

The Hybrid Czinger 21C Uses An 11,000rpm 2.9-Litre Twin-Turbo V8

Top speed in road setup is 268mph, with 250kg of downforce measured at 155mph. There’s also a lightweight track configuration that shaves 32kg from the existing setup and develops 790kg of downforce at 155mph at the expense of reducing top speed to a mere 236mph.

Power is sent through a strong and lightweight seven-speed, race-spec, automated manual sequential gearbox. We don’t yet have exact specs for the motors but we do know they’re linked to lithium-titanate batteries and a crank-driven starter/generator to make sure power is always available on demand.

Remote video URL

But just in case you were thinking this was by some miracle purely a mighty car, not a four-wheeled lifestyle accessory, we have some additional news. The company’s Geneva Motor Show stand will be shared by an upmarket coffee house, a maker of vastly expensive sunglasses with lenses tinted to match the 21C’s paint and glass, Michelin with a display of its latest tyre tech (fair enough) and a furniture company. Yep, while you gawp at the 21C you can also enquire about expensive lounge chairs. And it was all going so well.

Just 80 21Cs will be made. The company hasn’t confirmed how many will be in lightweight track-pack spec and it may simply depend on demand. Czinger’s press conference is scheduled for 11:00 on 3 March and we might find out the last few details then.

Sponsored Posts

Comments

Matt 44

Just pop over to Geneva and buy a couple, keep one as a collectors item and the other as the daily!

02/21/2020 - 08:17 |
16 | 0
Robert Gracie

In reply to by Matt 44

^^ DITTO!

02/21/2020 - 09:37 |
2 | 2
Robert Gracie

That is a tiny engine but with it spinning to 11,000rpm its become godly anything that spins above 10,000rpm is a godlike engine and demands respect!

02/21/2020 - 09:17 |
6 | 2
TheMindGarage

Just consider that just a few decades ago (or if you prefer, a quarter of the time cars have been around), 2.9-litre twin-turbo V8s only made 471hp. Insane stuff.

02/21/2020 - 13:43 |
6 | 0
V-Tech and EcoBoost kicked in yo

What’s interesting is that breaking records wasnt even the only goal. This car was made to show the 3D printing capabilities of the father company, Divergent 3D. In a way, this hypercar, which is largely 3D printed, is an advertisement to other manufacturers (not just automotive).

02/21/2020 - 15:14 |
10 | 0