The Latest Zenvo TSR-S Has Wheels You'd Be Terrified Of Kerbing

Zenvo's most recently commissioned TSR-S has "full fragmented" carbon fibre wheels, made in-house by the Danish company
The Latest Zenvo TSR-S Has Wheels You'd Be Terrified Of Kerbing

Having revealed the mad 1177bhp TSR-S a couple of years ago, Danish supercar builder Zenvo has been keeping busy making the things at a slow but steady pace. It builds just five cars a year, priced at €1.45 million apiece.

Without a shiny new product to plug this year, Zenvo is instead choosing to shout about its latest TSR-S commission - primarily because it has some especially spangly wheels.

Remote video URL

The rims are described as being made from “full fragmented” carbon fibre. The manufacturing process involves hand cutting and layering pieces of carbon fibre, all of which is done at Zenvo’s HQ at Præstø on the Danish island of Zealand. The whole set of finished wheels weigh about 15kg less than the alloy equivalent, Zenvo says.

They are admittedly rather showy, but anyone spending nearly £2 million on a supercar from a more obscure brand is likely going to dig that kind of thing. Let’s just hope the buyer never has to parallel park their TSR-S.

The Latest Zenvo TSR-S Has Wheels You'd Be Terrified Of Kerbing

Mechanically, nothing has changed. That means there’s a mid-mounted, flat-plane V8 displacing 5.8-litres and force-fed by two superchargers. Peak power comes in at 8500rpm, and if you hammer through the ratios of the seven-speed sequential gearbox fast enough, 124mph will arrive from rest in just 6.8 seconds.

The car also has Zenvo’s party piece ‘Centripedal’ rear wing, which acts as both an air brake and a cornering stabiliser thanks to two rotational axes.

The Latest Zenvo TSR-S Has Wheels You'd Be Terrified Of Kerbing

It’s cool, but we’ve seen it before. However, Zenvo does have something fresher on the tech front to reveal - a new version of its helical-cut gearbox. Transmissions like this are great for track use but can be pretty unpleasant away from it, but now, there’s a ‘Road’ mode with smoother electronically-assisted shifts.

The TSR-S you see here was due to be revealed at the Geneva Motor Show, but following the cancellation of the event, it was showcased at a private bash instead. So, we’ll have to just settle for having a good gawp at it in these images.

Sponsored Posts

Comments

Robert Gracie

Those rims look like a work of art and I agree I would be scared of kerbing them, imagine how much they cost!

03/12/2020 - 14:10 |
8 | 4
Anonymous

Wtf how could each wheel weigh 15kg less than an alloy equivalent? A bbs FI-R 9x20 weighs about 8kg. Even if they are much bigger there is no way they weigh 15kg less per wheel

03/12/2020 - 14:37 |
14 | 0
Robert Gracie

In reply to by Anonymous (not verified)

Something does not add up about the maths there…its as if they forgot to carry the 1 over or something, idk

03/12/2020 - 14:42 |
2 | 2
Matt Robinson
Matt Robinson

In reply to by Anonymous (not verified)

Our bad - it’s 15kg less for the whole set, I think.

03/12/2020 - 16:46 |
14 | 0
Anonymous

Why is the wing tilted

03/12/2020 - 22:33 |
0 | 0
EJ22 (A&P Performance co-owner)

In reply to by Anonymous (not verified)

Because that’s how it works
it tilts accordingly to the car’s cornering

03/12/2020 - 23:33 |
0 | 0
Olivier (CT's grammar commie)

Matt Robinson Your first link for the TSR-S throws out a 404

03/13/2020 - 03:33 |
0 | 0