Why Fake Wheels Can Be Potentially Dangerous

They can be a tempting modification that can be bought on the cheap, but there are some huge safety risks created by the cheap manufacture of some replica rims
Why Fake Wheels Can Be Potentially Dangerous

Replica wheels will forever be a tempting option for the budding car modifier, considering the huge cost of purchasing a full set of high-end rims. Replica wheels can be found for as little as £70 online, making them a mouth-watering prospect if they look the part and would give your car a whole new look.

But there are inherent dangers involved within the manufacture of these cut-price rims, so be extremely wary of any ‘too good to be true’ deals floating around Internet auction sites or a Craigslist equivalent. So what makes them so much of a risk?

Remote video URL

Unfortunately, many replica wheel manufacturers are in the business to make the cheapest wheels in bulk and as quickly as possible. This means that they skip many processes that proper wheel manufacturers implement to ensure safety, durability and performance at all times. This is because the equipment and time needed to perform the thorough testing and in-depth, quality manufacture cost a serious amount of money - money that the ‘OEM style’ producers usually decide isn’t worth spending.

The biggest factor that makes replica wheels a genuine danger is the manufacturing method used to quickly produce the wheels. Gravity casting is often used, which is the process of pouring molten metal into a ready-made cast and simply leaving it to set as it cools down. The wheel is then popped out of the cast once it has solidified and tidied up using skimming drill bits to get rid of any unwanted excess metal.

High braking torque and impact forces are the main causes of most replica wheel failures
High braking torque and impact forces are the main causes of most replica…

In the manufacture of proper OEM forged wheels, an air pressure is applied to the molten metal as it enters the casting, compressing the metal and forcing the wheel’s overall density to increase. This gives it an inherent strength and durability against whatever you can throw at it during a lifetime of driving. Gravity casting on the other hand leaves the wheel material full of irregular areas of density, therefore lacking the tensile, torsional or compressive strength to stay within the safety factor of their properly manufactured equivalents.

In addition to poor manufacturing, replica wheels will encounter little to no proper physical testing that will validate the design as a viable option for your car. Companies like BBS and BC put each wheel design through the following intense set of tests:

• Dynamic fatigue testing (simulating normal road driving) where the wheel is placed under load, with sensors showing how it deals with the forces and torques created by the contact with the road

• Cornering testing, where the wheel is spun horizontally to test its effectiveness with dealing with lateral loading

• Impact testing, where a sudden load is applied to the rim of the wheel to test its strength against possible pothole or kerb impacts

Remote video URL

The professional wheel manufacturers will not go forward with a wheel design unless it meets certain criteria within these tests, ensuring large safety factors within each wheel so that they have multiple lifetime guarantees engineered into each part of the wheel. On the other hand, the faked copies are pumped out in huge numbers with nowhere near the same research and development going into each wheel, leading to many possible – and justified – safety concerns.

Due to the replica wheels being made up of much more porous material, they are much more susceptible to cracking and in extreme cases completely shattering when they are confronted by heavy impacts and large torque inputs – forces that the OEM wheels are engineered to deal with. With spokes and wheel rims becoming natural focal points for stress and strain on the wheel, fake wheels have been known to completely sheer sections of wheel rim and multiple spokes due to a complete lack of strength within the material.

A replica BBS wheel looking extremely tempting...
A replica BBS wheel looking extremely tempting...

The finish and durability of a replica wheel will also potentially be poor in comparison to an OEM wheel. Proper wheel manufacturers apply protective coatings and resins to their wheels to protect them from moisture, dirt and pesky stone chips. Not only does this finishing touch protect the wheel from unwanted corrosion and damage, it will also keep your rims looking as fresh as the day they left the factory after a good clean.

Replicas are more inclined to have a fake ‘polished’ finish which will look great for a certain amount of time before chipping away and leaving a horribly irregular coverage of whatever coating was cheaply applied.

Why Fake Wheels Can Be Potentially Dangerous

The choice between fake and replica wheels in comparison to the more expensive OEM equivalent should all come down to safety, and the assurance of it from the supplier. If you do decide to go for a cheaper replica wheel, make sure that it comes with documentation stating that it has passed the relevant tests and has had the required coatings applied to it before being put on the shelf.

Fake wheels have been known to shatter under hard braking, cornering or even at motorway speeds, creating potentially lethal results due to the skimping of extremely important manufacturing methods. So we recommend you pay for quality.

Have you bought replicas wheels before? Have they been durable or a complete catastrophe? Comment with your experiences below!

Sponsored Posts

Comments

Chewbacca_buddy (McLaren squad)(VW GTI Clubsport)(McLaren 60

What about when James’s Volvo wheels shattered in the Africa special?

12/15/2016 - 11:37 |
22 | 4

There was a fossilised volvo under the ground which caused the volvo wheel to be shattered. I rest my case.

12/15/2016 - 12:02 |
64 | 2

Because he was running on pretty thin tires on a road full wil pot holes en rocks why do you think off-road cars have smaller rims and more tire sounds logic don’t you think (sorry for bad English I am from Holland)

12/15/2016 - 12:19 |
18 | 0

Simple.

Those wheels weren’t built like the Volvo itself.

12/15/2016 - 12:23 |
6 | 0

Those were aftermarket rims i believe?

12/15/2016 - 16:49 |
0 | 0
FsAviX

you probably should be too cheap when it comes to such essential parts as the wheels

12/15/2016 - 11:38 |
0 | 0
captaind00m

thank god no one makes fake steel rims

12/15/2016 - 11:40 |
178 | 2

Galvanized diecast steel rims?

12/15/2016 - 17:14 |
6 | 0
Curuţ Alin

Saying you dont have money for BBS, but you are still having 2 kidneys...Thats a sin right there!

12/15/2016 - 11:43 |
128 | 2

Have this set on my e39, love the look. I wanted to get a set that matched for my Miata, but BBS doesn’t make Style 5’s in that bolt pattern and size. :(

12/15/2016 - 12:31 |
6 | 0
Anonymous

Not all reps are bad, the old adage of you get what you pay for rings true. I have had a set of VMR CSL reps on my E46 since 2008, they’ve needed paint refurb (naturally) but are structurally sound. They’re JWL/VIA compliant and the price reflects that, to think a £70 set of rims will have anywhere near enough quality control is naive at best.

12/15/2016 - 11:45 |
6 | 0
K.E.L

Just avoid potholes :D

12/15/2016 - 11:54 |
0 | 0
The Stan

When it comes to wheels it’s function>form. I dont care if the stock ones are ugly af, if it’s that or some fake ass wheels, im taking my safety first.

12/15/2016 - 12:02 |
6 | 8
Anonymous

Stupid article is stupid. I can blast off a short list of OEM wheels with a reputation for failing just as readily as reps do. Check out superspeeders rob’s youtube channel for a video of him cracking a genuine Ferrari 458 wheel too.

12/15/2016 - 12:49 |
4 | 16
Anonymous

In reply to by Anonymous (not verified)

He did hit a pot hole though. The distinction is that under typical HARD driving, the 458 wheels would be fine. But if it cornered too much on to a kerb, or hits a nasty pothole, all bets are off. Replicas, like the article is saying, can crap out at much less extreme driving.

12/15/2016 - 14:31 |
8 | 0
Driven to Drive 1

In reply to by Anonymous (not verified)

I’m guessing you use fake wheels lol!

12/15/2016 - 15:46 |
0 | 0
hamrocks

Would love to see a poll of us CTzens as to who runs fake and who runs genuine wheels…

12/15/2016 - 13:10 |
52 | 0
Anonymous

are Rota wheels worth it?

12/15/2016 - 13:20 |
6 | 0