The Problem With Rotary Engines: Engineering Explained

Loads of power in a tiny, simple, lightweight package. There's a lot to love about the Wankel rotary engine, but not enough to keep it alive. Let's take a look at what went wrong
The Problem With Rotary Engines: Engineering Explained

They’re compact, powerful and they make an awesome noise. So why did rotary engines never really take off, and why has the concept been all but abandoned by the one manufacturer that championed it? Let’s take you through it.

The 1964 NSU Spider was the first production car in the world to melt the rear tyres under the power of a Wankel rotary engine. The Wankel’s automotive debut was decades in the making, though its lifespan was relatively short ending with the 2011 Mazda RX-8. This leads us to several questions:

  1. How does the rotary engine work?
  2. What advantages does this engine have? (Why was it made?)
  3. What disadvantages does the engine have? (Why did it die?)
Remote video URL

The process of the rotary engine is very similar to what occurs in a traditional piston cylinder engine. The difference is instead of pistons, there’s a triangular-shaped rotor, and instead of cylinders there’s a housing reminiscent of an oval.

Intake

As the rotor moves within the housing, a small pocket of air expands into a larger pocket, thus creating a vacuum. This vacuum is exposed to the intake ports, which air and fuel are then drawn from into the combustion chamber.

Compression


The rotor continues to rotate, compressing the air-fuel mixture against the flat side of the rotor housing. 


Shout out to Ethan Smale for the epic GIF!
Shout out to Ethan Smale for the epic GIF!

Power


Two spark plugs are used to ignite the air-fuel mixture, helping to speed up the combustion process and ensure the majority of the fuel burns, and this forces the rotor to continue to rotate.

Exhaust

Similar to the intake stroke, the rotor moves until exhaust ports are accessible, and the exhaust gases at a high pressure are then forced out as the rotor closes off the housing.

What’s important to realise is that unlike in a piston cylinder engine, within a single rotor housing all of these events are occurring nearly simultaneously. This means that while intake is occurring on one portion of the rotor, a power stroke is also occurring, leading to a very smooth power delivery and a large amount of power in a small package. 


2. What advantages does the Wankel engine have?

The Problem With Rotary Engines: Engineering Explained

Weight-to-Power

One of the biggest advantages of the rotary engine was its size. The 13B engine of the Mazda RX-7 took up about one cubic foot of volume, yet produced a significant amount of power for its small proportions.

Fewer Moving Parts

Often in engineering, the simplest solution tends to be one of the best solutions. The rotary engine drastically reduces the number of parts required for combustion to occur, with just three main components spinning in a two-rotor motor.

Smooth and High Revving

The rotary engine has no reciprocating mass, like valves or pistons in a traditional engine. This leads to an incredibly balanced engine with smooth power delivery, and the ability to rev high without concern of things like valve-float.

Remote video URL

The 2011 Mazda RX-8 was the final production vehicle with a Wankel rotary, the 1.3-litre Renesis. Whether or not the RX-8 lived up to the rotary name, we all shed a tear at the loss of this innovative and unique approach to internal combustion. What dealt the final blow? The RX-8 was unable to meet Euro 5 emissions regulations, and thus it could no longer be sold in Europe after 2010. Though still legal in the states, sales had significantly dropped as the model had been around since 2004.

What disadvantages are there to the rotary design?

Just three major moving parts in a two-rotor Wankel engine
Just three major moving parts in a two-rotor Wankel engine

Low Thermal Efficiency

Due to the long and uniquely-shaped combustion chamber, thermal efficiency of the engine was relatively lower compared to piston-cylinder counterparts. This also often led to unburnt fuel leaving the exhaust (hence the tendency of rotary engines to backfire, which is obviously as awesome as it is inefficient).

Burn Baby Burn

By design, the rotary engine burns oil. There are oil squirters in the intake manifold, as well as injectors to spray oil directly into the combustion chamber. Not only does this mean the driver must regularly check oil levels to keep the rotor properly lubricated, but it also means more bad stuff comes out the tailpipe. And the environment hates bad stuff.

This hole in the housing is where oil is directly injected into during the intake
This hole in the housing is where oil is directly injected into during the…

Rotor Sealing

Another issue which also can impact emissions: it’s challenging to seal the rotor when it’s surrounded by vastly different temperatures. Remember, intake and combustion are occurring simultaneously, but in very different locations in the housing. This means that the top of the housing is relatively cool, while the bottom of the housing is much hotter. From a sealing standpoint, this is problematic, as you’re trying to create a metal-to-metal seal with metals which are operating at significantly different temperatures. By using coolant jackets to help even out the heat load, this problem can be reduced, but never fully diminished.

Emissions

When you put it all together, emissions killed off the rotary. The combination of inefficient combustion, inherent oil burning, and a sealing challenge result in an engine that’s not competitive by today’s standards on emissions or fuel economy.

How does the RX-8 stack up against competitors?

The infamous apex seal from an RX-7 13B rotor
The infamous apex seal from an RX-7 13B rotor

In my video describing the drawbacks of the RX-8, viewers rightfully pointed out that I compared model year 2015 vehicles to a 2011 model in terms of fuel economy, which was unfair on Mazda’s end. Let’s right this wrong, using the RX-8’s first model year.

CarEngine SizeWeightPowerMPG Combined Rating
2004 Mazda RX-81.3L Wankel3053 lb (1385 kg)197-238 HP (Auto/Man)18 mpg (13L/100km)
2004 VW GTI1.8L I42934 (1330 kg)180 HP24 mpg (9.8L/100km)
2004 Corvette5.7L V83214 lb (1458 kg)350 HP20 mpg (11.8L/100km)

As you can see above, the RX-8 doesn’t stack up favourably in terms of fuel economy. The Corvette, with a significantly larger engine, 47 per cent more power, and five per cent more weight still manages 11 per cent better fuel economy. It’s also worth mentioning that this was the first model year for the RX-8, while the Corvette and GTI engines had been around from previous years. Quite simply, there’s nothing good to say about the RX-8 in terms of fuel economy. Although the buyer may not necessarily view this as a negative point, without passing emissions there is no car to buy.

It’s worth noting that since the original publishing of this article, Mazda has announced it will bring back rotary engines, although only as small range extenders in electric vehicles. In other words, nothing that will go ‘braap’.

Sponsored Posts

Comments

Matt O'Loughlin

What about the possibility of an independent company developing a race/performance orientated rotary with modern technology.

01/23/2016 - 13:01 |
0 | 0
Matthew Henderson

But its back.. the new RX9

01/23/2016 - 13:02 |
2 | 0

Mazda dropped a rotary power car and are looking for hybrid use.

03/11/2017 - 10:00 |
0 | 0
Black Coyote "Rogue Driver" Ray 6T

:(

01/23/2016 - 13:17 |
0 | 0
Camden Wolfe

If the rotary were to come back, it needs to be improved like mad.

Scratch that, make it improved by the ILLUMINATI.

01/23/2016 - 13:38 |
2 | 0
Anonymous

Well I mean if you want fuel efficiency the Prius and other hybrid cars might be more up your alley.

01/23/2016 - 16:06 |
0 | 0
Anonymous

They seem to be fine to me. See them things everywhere on the road.

01/23/2016 - 16:08 |
0 | 0
Lamborghini SV

“brap is love, brap is life.”

01/23/2016 - 16:38 |
10 | 0
Anonymous

Very interesting. I’m not even so tehnically educated, but I understand the most of this video. I would like to have a car with a rotary engine in it. ☺

01/23/2016 - 16:45 |
0 | 0
Anonymous

Nothing is wrong with the engine!!!! The engine is very good

01/23/2016 - 16:57 |
8 | 4
Keaton Shumard

This was written by someone who doesn’t want to admit that these engines are just trash.

01/23/2016 - 20:11 |
0 | 6